Samsung 710 User Manual page 23

This section will describe how to start working with your ARTIK 710 Development Environment by setting up a serial
connection on your development PC and booting up the ARTIK 710 Development Environment.
As a first step we will select a serial console to communicate with the ARTIK 710 Module that is located on the ARTIK 710
Development Environment. You can use a typical Linux serial console as depicted in Figure 22, using the serial connector. If
your PC does not have a serial port, use the micro-USB B serial cable instead. To use the serial USB cable you need to install
the associated device driver. Figure 23 depicts the USB serial cable and where it is hooked up to the Platform Board.
23