Cisco Linksys RE1000 User Manual page 9

Linksys RE1000
NOTE: If you have an access point or a router that
do not support Wi-Fi Protected Setup, note the
wireless settings, and then manually configure
the Extender
Wi-Fi Protected Setup (AP mode for adding
new wireless clients behind the Extender)
Wi-Fi Protected Setup is a feature that makes it easy to set
up your wireless network If you have client devices, such
as wireless printers, that support Wi-Fi Protected Setup,
then you can use Wi-Fi Protected Setup
Three methods of Wi-Fi Protected Setup are available
Use the method that applies to the client device you are
configuring
Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)
NOTE:
Wi-Fi Protected Setup configures one
client device at a time Repeat the instructions
for each client device that supports Wi-Fi
Protected Setup
Wi-Fi Protected Setup Light Activity
The Cisco logo on the top panel of the Extender
•
functions as the Wi-Fi Protected Setup light
When the Wi-Fi Protected Setup process is active, the
•
light flashes slowly When the Wi-Fi Protected Setup is
successful, the light is continuously lit
If there is an error, the light flashes quickly for two
•
minutes; please wait and try again
Wait until the light is continuously lit, before starting
•
the next Wi-Fi Protected Setup session
Wi-Fi Protected Setup Button
•
your client device has a Wi-Fi Protected Setup button
Wireless-N Extender
Use this method if
Chapter 2: Advanced Configuration
NOTE: Make sure you configure one client
device at a time
Wi-Fi Protected Setup > Wi-Fi Protected Setup Button
c Click or press the Wi-Fi Protected Setup button on
the client device
d Click the Wi-Fi Protected Setup button on the
Extennder's Wi-Fi Protected Setup screen, OR press
and hold the Wi-Fi Protected Setup button on the
top panel of the Extender for one second
e After the client device has been configured, click
OK on the Extender's Wi-Fi Protected Setup screen
within two minutes
Enter Client Device PIN on Extender
•
method if your client device has a Wi-Fi Protected
Setup PIN (Personal Identification Number)
Wi-Fi Protected Setup > Enter Client Device PIN on Extender
a Enter the PIN from the client device in the field on
the Extender's Wi-Fi Protected Setup screen
b Click the Register button on the Extender's Wi-Fi
Protected Setup screen
c After the client device has been configured, click
OK on the Extender's Wi-Fi Protected Setup screen
within two minutes
Enter Extender PIN on Client Device
•
method if your client device asks for the Extender's
PIN
Wi-Fi Protected Setup > Enter Extender PIN on Client Device
a On the client device, enter the PIN listed on the
Extender's Wi-Fi Protected Setup screen (It is also
listed on the bottom of the Extender )
b After the client device has been configured, click
OK on the Extender's Wi-Fi Protected Setup screen
within two minutes
Use this
Use this
7