Table of Contents
Advertisement
Express Script (Cont.)
(Continued from previous page)
• Input & CH: Edit the channel lineup, as necessary. Use the
Left/Right arrow keys on the Installer Remote to select channels
(including Aux inputs), and press OK to delete (or re-add)
channels per the installation site requirements.
Note: When a channel is active in the channel lineup (i.e.,
added), all additional fields in this screen are selectable/
available. If a channel is deleted, all other fields in this screen
become inaccessible (grayed out).
• Icon: This field enables you to select the appropriate trademark/
icon for each channel's Channel-Time on-screen display. If
known, you can direct enter the icon number using the number
keys on the Installer Remote. Otherwise, use the Left/Right arrow
keys on the Installer Remote to select the desired logo. Icons
are available for familiar channels, such as ABC, CBS, NBC,
etc. Identifiable icons should enable the end user to readily know
what common networks are available.
• Label: Press OK to display the pop-up virtual alphanumeric
keypad, and add a custom text label for each channel/Aux input
(up to 17 characters), as desired. Added custom labels will be
displayed above the Label/Keypad field for each channel, as
applicable.
• Bank: Use the arrow keys to define channel banks, as desired.
See "Channel Banks Overview" on the following page for further
information.
When you are finished, press MENU to close the pop-up window.
Use the arrow keys to select Next, and then press OK.
7. Select the channel tuning/channel banner display format.
If logical channel tuning (default) is appropriate for the installation
site, you can simply select Next and press OK. Otherwise, use
the Up/Down arrow keys on the Installer Remote to select the
channel tuning/channer banner field, and then use the Left/Right
arrow keys on the Installer Remote to select "Physical" for the
channel tuning/channel banner display format. When you have
made your selection, use the arrow keys to select Next, and then
press OK.
8. Completion.
As the final step of the Express Script, the TV saves your settings
and uses the channel/Aux input lineup to create an FTG Channel
Map before configuring the TV for FTG Mode via CPU (see also
notes on following page). When you are ready to proceed, select
Finish, and then press OK.
Configuration progress will be shown at the bottom of the screen.
When this step is complete, the Express Script exits, and the TV
tunes to the first channel in the FTG Channel Map.
24
Express Script
Step 6. Edit the Channel Lineup
Searched CH: 135 / Enabled Aux: 3 / Added CH: 128 / Added Aux: 3
Would you like to edit the channel lineup?
* You can add up to 600 channels (Aux added as analog).
• Input & CH
• Icon
Edit Channel Lineup
Back
You can also use numeric keys to direct enter Icon
PTC: V#.##.### CPU: V##.##.##.## ASIC: D279
• Label
• Bank
1
2
3
4
Add/Delete
Note: The total number of channels found
("Searched") during Auto Tuning is indicated
at the top of the pop-up window.
Express Script
Step 7. Channel Tuning/Channel Banner Display
Which channel tuning/channel banner display
format would you like to use?
Logical
Back
PTC: V#.##.### CPU: V##.##.##.## ASIC: D279
Express Script
Step 8. Complete the Express Script
This step uses the auto-tuned/edited channel lineup to create an FTG Channel Map and
configure the TV's CPU for FTG operation.
If you did not run Auto Tuning, no digital or analog channels will be included in the FTG
Channel Map upon completion of this step. In this case, only the Aux inputs from the
channel lineup will be included in the FTG Channel Map.
Select 'Finish' to complete the Express Script.
Saving data... 0%
Back
PTC: V#.##.### CPU: V##.##.##.## ASIC: D279
1
2
3
4
5
6
7
8
►
►
►
►
►
►
►
DIGITAL 2-1
►
No Logo
Next
number (0–212)
OK
Exit
CC
Keypad
NORMAL
ADDED
ADDED
ADDED
ADDED
Move
Exit
MENU
7
1
►
2
►
3
►
4
►
5
►
6
►
►
8
Next
OK
Exit
CC
8
1
►
2
►
3
►
4
►
5
►
6
►
7
►
Finish
OK
Exit
CC
206-4281
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
