LG 22LX570M Commercial Mode Setup Manual page 17

Automated Pro:Centric Configuration
Note: If the server is not yet configured on the system, use the
manual configuration option to configure the Pro:Centric operation.
Once the Pro:Centric data channel is found (a Pro:Centric
Server Was Found screen will be displayed) and the Pro:Centric
Application Mode is determined, the wizard will advance to the
Processing the Pro:Centric Configuration screen, which shows the
progress of the data downloads (see example at right). Note that
some steps may require a few minutes.
If the process is successful, no further user interaction is required,
though, in some instances, where the option (for example "Next")
is available, you may manually move forward to subsequent steps
within the wizard to speed up the process.
Note: If, after completing the search, the TV is unable to find the
Pro:Centric data channel (while the Searching for Pro:Centric
Server screen is on display), the wizard will stop and show a
Diagnostics screen that enables you to manually return to the
previous screen (to reinitiate the configuration) or exit the wizard.
When the Pro:Centric Configuration is complete, an EZ-Manager
Configuration Complete screen is displayed, and after 10 seconds,
the wizard exits, and the TV turns OFF.
Note: With the EZ-Manager Configuration Complete screen on
display, you can also manually turn off or reboot the TV. If desired,
select Turn Off or Reboot, respectively, and then press OK on the
Installer Remote.
Manual Pro:Centric Configuration
1. With the Searching for Pro:Centric Server screen on display,
use the Left/Right arrow keys on the Installer Remote to
select Manual Pro:Centric at the bottom right of the screen,
and then press OK.
In the Pro:Centric Manual Configuration screen (see example
at right), you will be able to configure the appropriate
Pro:Centric settings in the TV. Use the Up/Down arrow keys
on the Installer Remote to navigate between fields.
2. In the Pro:Centric Mode field, use the Left/Right arrow keys to
select the appropriate Pro:Centric Application Mode—FLASH,
GEM, or Configuration Only.
Note: For remote management only, select Configuration
Only. The TV will search for TV E-Z Installation data down-
loads; however, Pro:Centric application data will not be
downloaded, i.e., Installer Menu item 098 PRO:CENTRIC
will be set to 0.
206-4281
EZ-Manager Wizard (Cont.)
Z
EZ-Manager Wizard
2
3 4
1
Pro:Centric Server was found...
It may take 2 second(s).
The Pro:Centric data channel was found!! (Data Channel: 75, Mode: GEM)
The Download window will open in 2 second(s). You may wait or select 'Next'.
Otherwise, if you select 'Exit', the Pro:Centric server settings can be retained
and used during the next download by selecting 'Save & Exit' in the Exit window.
Status : Tuning channel 75
The Pro:Centric data channel is found!!
(Data Channel: 75, Mode: GEM)
Back
EZ-Manager Wizard
3 4
1 2
Processing the Pro:Centric Configuration...
Downloading the maintenance files takes several minutes.
Retrieving files from data channel 75
Application files
Maintenance files
– Updating Configuration File
Warning - Do not remove AC power or the signal cables during these steps
EZ-Manager Wizard
4
1 2 3
EZ-Manager Configuration Complete
The TV will turn off in 3 second(s).
Installed Components
Pro:Centric Application
Maintenance Files
Reboot
EZ-Manager Wizard
2 4
1 3
Pro:Centric Manual Configuration
Pro:Centric Mode
Data Channel
Signal Strength
Signal Quality
Back
Exit Next
Please wait...
20%
GEM app downloaded
In progress...
GEM application downloaded
LX570M_Config.tlx
Turn Off
< >
GEM
1
0%
0%
No signal
Exit Next
(Continued on next page)
17