HP ProCurve 6400cl Series Management And Configuration Manual page 60

Using the Command Line Interface (CLI)
Using the CLI
Table 4-1. Privilege Level Hierarchy
Privilege Example of Prompt and Permitted Operations
Level
Operator Privilege
Operator Level HPswitch>
Manager Privilege
Manager Level HPswitch#
Global
HPswitch(config)#
Configuration
Level
Context
HPswitch(eth-5)#
Configuration
HPswitch(vlan-
Level
100)#
4-6
show < command > View status and configuration information.
setup
ping < argument > Perform connectivity tests.
link-test < argument >
enable Move from the Operator level to the Manager
level.
menu Move from the CLI interface to the menu interface.
logout Exit from the CLI interface and terminate the
console session.
exit
Terminate the current session (same as logout).
Perform system-level actions such as system
control, monitoring, and diagnostic commands,
plus any of the Operator-level commands. For a list
of available commands, enter
Execute configuration commands, plus all
Operator and Manager commands. For a list of
available commands, enter
Execute context-specific configuration
commands, such as a particular VLAN or switch
port. This is useful for shortening the command
strings you type, and for entering a series of
commands for the same context. For a list of
available commands, enter
?
at the prompt.
?
at the prompt.
?
at the prompt.