Cli: Ping Or Link Tests - HP ProCurve 6400cl Series Management And Configuration Manual

Hide thumbs Also See for ProCurve 6400cl Series:
Table of Contents

Advertisement

Troubleshooting
Diagnostic Tools
Basic Ping
Operation
Ping with
Repetitions
Ping with
Repetitions
and Timeout
Ping Failure
Figure C-19. Examples of Ping Tests
C-48
Number of Packets to Send is the number of times you want the switch to
attempt to test a connection.
Timeout in Seconds is the number of seconds to allow per attempt to test a
connection before determining that the current attempt has failed.
To halt a Link or Ping test before it concludes, click on the Stop button.
To reset the screen to its default settings, click on the Defaults button.

CLI: Ping or Link Tests

Ping Tests. You can issue single or multiple ping tests with varying repeti­
tions and timeout periods. The defaults and ranges are:
Repetitions: 1 (1 - 999)
Timeout: 5 seconds (1 - 256 seconds)
Syntax: ping < ip-address > [repetitions < 1 - 999 >] [timeout < 1 - 256 >]
To halt a ping test before it concludes, press
.
[Ctrl] [C]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 5300xl seriesProcurve 3400cl series

Table of Contents