Chapter 2 Preparations & Installation; Installing And Configuring Dvr-400 - Planet DVR-400 User Manual

Chapter 2
Preparations & Installation

Installing and Configuring DVR-400

STEP1:
Please power off the DVR-400 and unlock the DVR-400 swappable HDD tray
STEP2:
Remove the harddisk tray cover; connect your harddisk securely with the DC power cable and IDE
cable in the harddisk tray. Make sure the installed HDD is set to "Master" and secure the HDD
using the original HD screws or the screws in the DVR-400 accessory pack.
Place and lock the HDD tray to DVR-400. Power on the DVR-400, the
DVR-400 will now automatically detect and format the new disk(s).
2
5