TP-Link Archer MR200 User Manual page 88

?
The router support two operation modes, 3G/4G Router Mode and Wireless Router
mode. If you already have a modem or your Internet comes via an Ethernet cable from
the wall, you can set up the router as a regular wireless router to share the Internet
1. Connect your router's LAN4/WAN port to the modem or the network port.
2. Visit http://tplinkmodem.net, and log in with password you set for the router.
3. Go to
4. Select the
T7. How to use the WDS Bridging function to extend my wireless
network?
My house covers a large area. The wireless network coverage of the router I'm using
(the root router) is limited. I want to use an extended router to extend the wireless
network of the primary router. Follow the steps to configure the router.
1. Visit http://tplinkmodem.net, and log in with password you set for the router.
2. Configure the
For example, if the IP address of the root router is 192.168.0.1, the IP address of the
extended router should be from 192.168.0.2 to 192.168.0.254.).
3. Go to
select the wireless network 2.4GHz or 5GHz appropriate to your needs. Select the
checkbox to enable the
4. Click
Downloaded from www.Manualslib.com
Advanced > Operation Mode
Wireless Router Mode
LAN IP address
Advanced > Wireless >
WDS Bridging
Survey to scan all the AP devices and choose the root AP to be bridged.
manuals search engine
page.
option and click Save
of the router in the same subnet as the root router.
Advanced Settings page. Locate the
function.
to make the settings effective.
WDS section and
84