Start Your Installation - Planar PT1700MX User Manual

12

Start Your Installation

Remove the Back Cover
Please follow these instructions to remove the cover on the back panel of the
LCD so that you can hookup the cables to associated connector.
Figure A.
To remove the back cover, follow the arrows in Figure A and pull out with your
fingers and the cover should be removed from the stand.
Follow the instructions on page 14 ( Figure 11.1 ) to connect the cables to the
appropriate connectors.
Attach the cover back to the LCD stand by pressing firmly until the tabs snap
into place. You may also keep the cables in order by using the cable organizer.