Alcatel-Lucent 8242 User Manual page 84


Short press: access the company directory.

Long press: customizing your telephone.

In communication mode: Activate/deactivate the mute
feature. No feature is associated with this key in idle mode.

In communication mode: Activate/deactivate the
loudspeaker.

In idle mode. Access the ringer and vibrate adjustment
feature.

Access to personal speed dial (long press.).

Green steady: the phone is on the charger and the battery is
fully charged.

Red steady: the phone is on the charger and the battery is
charging.

Slow yellow flashing: Telephonic event such as unread
message, missed call, etc.
LED.

Rapid yellow flashing: Incoming call.

Slow red flashing: Out of coverage.

Rapid red flashing: low battery warning.

Slow blue flashing: bluetooth is activated.

Flashing when the phone is plugged into the charger means
the same as when the phone is not plugged into the charger.
Related Documentation - Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following Web site :
http://enterprise.alcatel-lucent.com?product=All&page=Directory. 8AL90311USADed01 - copyright © ALE International 2017
Switch the phone on/off, lock/unlock the
phone and activate standby mode.

Switch on (long press).

Switch off (long press).

Lock/unlock the phone.

Standby mode on/off (short press).

Answer the call.

Long press (feature
depending on the system):
redial last number or access
the redial list.

Switching between two calls
(broker call).

Switch off ringer.

Hang up.

Return to previous menu.

Erase a character.

Delete an entire field.

Access menu.

Access menu.

Confirm.

Navigate.

3.5 mm jack plug for headset and maintenance.

Short press: decrease the volume of ring tone during an incoming call (4 steps) or
decrease volume of loudspeaker during a conversation (8 steps).

Long press: activate/deactivate the mute feature.

Short press: increase the volume of ring tone during an incoming call (4 steps) or
increase volume of loudspeaker during a conversation (8 steps).

Long press: activate/deactivate the loudspeaker.

Clip to hook your phone on your belt. You can remove the clip and instead use
the cover that is provided in the phone package.

Usb socket for charging the battery and upgrading the phone.

Press on this key to light up the screen when the phone is in idle state.

Can be programmed to lock/unlock the phone.

Back to homepage.

Programmable keys (f1 and f2 keys).

Depending on whether the device is in vibrate mode or ring
mode, this key will have different effects. It is a shortcut to
adjust the vibration/ring effect. Refer to the section about the
audio key.
Charging your telephone battery
How to dock your phone on the desk support
Put your phone on its support. Plug the USB cable into the 5V socket of the desktop charger. Plug
the other end of the USB cable into the AC/DC adaptor. Plug the AC/DC adaptor into the mains
power supply.
If you are using a dual charger, put your phone in the upper slot.
Charging the battery with a USB cable
Plug the USB cable into the USB port of your phone. The other end of the USB
cable can be plugged into the AC/DC adaptor or into a computer USB port.
You can also charge your phone from any USB plug, such as a computer USB plug. However, the
charging time is longer than charging with the AC/DC adapter.
LED

In order to have a fully operational 8262 DECT Handset, make sure that you have the following
items: the battery, the AC/DC adapter, the power supply and the USB cable.

Red steady: the phone is on the charger and the battery is charging
Charge the battery for about 3 hours before initial use.
Recharge your telephone battery regularly. The telephone can be on or off when recharging the
battery. If the telephone is to remain unused or out of its charger for several weeks, remove the
battery and store it separately.
The battery charging time is less than 3 hours. The charging time is longer if charging through the
USB plug from a device other than the AC/DC adapter.