Alcatel-Lucent 8242 User Manual page 6

8242 DECT Handset
Led

3.5 mm jack plug for headset and maintenance.

Short press: decrease the volume of ring tone during an incoming call (4 steps) or
decrease volume of loudspeaker during a conversation (8 steps).

Long press: activate/deactivate the mute feature.

Short press: increase the volume of ring tone during an incoming call (4 steps) or increase
volume of loudspeaker during a conversation (8 steps).

Long press: activate/deactivate the loudspeaker.

Clip to hook your phone on your belt. You can remove the clip and instead use the cover
that is provided in the phone package.

Usb socket for charging the battery and upgrading the phone.

If configured this key can be used to lock your phone or to send a notification call to an
alarm server. For more information contact your administrator.

Can be programmed to lock/unlock the phone.
8AL90306USACed01

Green steady: the phone is on the charger and the battery is fully charged.

Red steady: the phone is on the charger and the battery is charging.

Slow yellow flashing: telephonic event such as unread message, missed call,
etc.

Rapid yellow flashing: incoming call.

Slow red flashing: out of coverage.

Rapid red flashing: low battery warning.

Slow blue flashing: bluetooth is activated.

Flashing when the phone is plugged into the charger means the same as
when the phone is not plugged into the charger.

Back to homepage.

Programmable keys (f1 and f2 keys).

Depending on whether the device is in vibrate mode or ring mode, this key
will have different effects. It is a shortcut to adjust the vibration/ring effect.
Refer to the section about the audio key.
58
6 /