Table of Contents
Advertisement
Adjusting the Viewing Angle
Your LCD Monitor is designed to allow you to adjust it to a comfortable viewing angle. The LCD Monitor's angle
setting range is from -5° to 15°.
Connecting AC Power
1. Plug the female end of the power cable into the AC-adapter. Plug the male end of the power cord into a wall
socket. The plug on the power cable will vary according to the electrical standard in your area.
2. Connect the power connector of the adapter into the jack of the LCD Monitor. The AC power jack is located at
the rear of the Monitor near the D-sub VGA connector.
Connecting Video
1. Turn off your PC and the LCD Monitor before connecting your LCD
2. Monitor to the computer.
3. Connect the VGA signal cable to the D-sub VGA connector located at the rear of the monitor.
4. PC has a graphic card with a 24-pin DVI connector, you should connect it with the Digital 24-pin DVI signal
cable.
3
Chapter 1
Advertisement
Table of Contents
