[ 1.3 ] B Board Removal
Remove the cover and front panel as indicated in [1-1] and [1-2]. Disconnect CN600 power cord and remove from
unit. Remove the 1 Philips screw from the rear panel. Remove the 3 Philips screws from the circuit booard. The B
board can then be lifted clear of the chassis.
Screws
CN600
Screw
Screw
[ 1.4 ] Chassis Removal
To remove, lift the front of the chassis slightly to clear the stops and slide forward out of the bottom cover.
Stops
Service Manual
- 5 -