Gas Connection - Gorenje 4106... Instructions For Use, Mounting And Connection

Gas connection

Safety precautions
Connection
16
• This appliance shall be installed in accordance with the
regulations in force and only used in a well ventilated space.
Read the instructions before installing or using this appliance.
• Prior to installation, ensure that the local distribution conditions
(nature of gas and gas pressure) and the adjustment of the
appliance are compatible.
• The adjustment conditions for this appliance are stated on the
label (or data plate).
• This appliance is not connected to a combustion products
evacuation device. It shall be installed and connected in
accordance with current installation regulations. Particular
attention shall be given to the relevant requirements regarding
ventilation.
• Connect the appliance in accordance with the regulations of
the local gas supplier.
• Gas cooker is equipped with the ISO7-1 R ½" gas connection
on the right side.
• Appliance is supplied with the liquid gas connection and non-
metal gasket.
• During connection hold the elbow R 1/2 to prevent it from
turning.
• Use metal or non-metal gaskets for connection packing. Metal
gaskets may be used only once. Thickness of non-metal
gaskets can be deformed up to 25% maximally.
• Connect the appliance to the liquid gas supply by means of
attested fl exible hose.
• The hose may not touch the bottom side of the appliance, or
the back and the top of the oven.
• If the kitchen element below the hob has an integrated oven,
it must be fi tted with the cooling fan and the connection hose
must entirely be made of metal (for example fl exible stainless
steel gas connection hose). Connection hose must not touch
the top oven panel or the hob bottom.
• Flexible hose shall be fi tted in such a way that it cannot come
into contact with a moveable part of the housing unit (e.g. a
drawer) and does not pass through any space susceptible of
becoming congested.
Check sealing of all joints and couplings after
connection.