Install The Receiver - Radio Shack 1500332 User Manual

3. Connect the supplied AC adapter to the DC 12V
4. Adjust the flip-up antenna so that the dotted side
2
1. Make sure the receiver is off, then connect the
2. Connect the supplied AC adapter to the DC 12V
3. Adjust the antenna so that the dotted side faces the
n
• S-Video and Composite Video are interchangeable,
• If you use the S-Video connection on the transmitter,
•
•
15-332 -EN 033110.indd 5
jack, then plug it into a standard household outlet.
faces the receiver.

Install the Receiver

receiver to your TV with the RCA cable.
jack, then plug it into a standard household outlet.
transmitter.
Notes:
but S-Video is usually the dominant input. There will
no picture output at the receiver, if your A/V device
only has composite video and you connect S-Video
cable to the transmitter.
you must also use the S-Video connection on the
receiver.
Make sure the receiver is set a little forward to the top
of TV in order to have the best IR performance.
Turn the dotted side of the transmitter and receiver
face to face to obtain the best performance.
5
4/6/2010 5:25:09 PM