D-Link Dir-879 User Manual - D-Link DIR-879 User Manual

Section 4 - Coniguration
Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username
and password.
Enter the L2TP server IP address provided by your ISP.
L2TP Server IP
Address:
Enter the username provided by your ISP.
Username:
Enter the password provided by your ISP.
Password:
Select either Always-on, On-Demand, or Manual.
Reconnect
Mode:
Enter a maximum idle time during which the Internet connection
Maximum Idle
is maintained during inactivity. To disable this feature, enable Auto-
Time:
reconnect.
Select Static IP if your ISP assigned you the IP address, subnet mask,
Address Mode:
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Enter the IP address provided by your ISP (Static IP only).
L2TP IP
Address:
Enter the subnet mask provided by your ISP (Static IP only).
L2TP Subnet
Mask:
Enter the gateway IP address provided by your ISP (Static IP only).
L2TP Gateway
IP Address:
Enter the primary DNS server IP address assigned by your ISP.
Primary DNS
Server:

D-Link DIR-879 User Manual

L2TP
30