D-Link Dir-879 User Manual - D-Link DIR-879 User Manual

Section 4 - Coniguration
Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet Service
Provider (ISP).
Enter the username provided by your ISP.
Username:
Enter the password provided by your ISP.
Password:
Select either Always-on, On-Demand, or Manual.
Reconnect
Mode:
Enter a maximum idle time during which the Internet connection
Maximum Idle
is maintained during inactivity. To disable this feature, enable Auto-
Time:
reconnect.
Select Static IP if your ISP assigned you the IP address, subnet mask,
Address Mode:
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Enter the IP address provided by your ISP (Static IP only).
IP Address:
Enter the ISP service name (optional).
Service Name:
Enter the primary DNS server IP address assigned by your ISP.
Primary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
Secondary DNS
Server:
Maximum Transmission Unit - you may need to change the MTU for
MTU:
optimal performance with your ISP.
The default MAC address is set to the Internet port's physical interface
MAC Address
MAC address on the router. You can use the drop-down menu to
Clone:
replace the Internet port's MAC address with the MAC address of a
connected client.
Click Save when you are done.

D-Link DIR-879 User Manual

PPPoE
27