JVC LT-26A70BJ Service Manual page 17

4.5.5.2 DESCRIPTION OF STATUS DISPLAY
SETTINGITEM No. SETTING ITEM
S001 5I R OF S001 5I R OF
PAL50 PAL50 FULL FULL
SIGNAL SYSTEM ZOOM MODE
(1) SIGNAL SYSTEM
The signal displayed on the screen is displayed.
PAL50 : PAL50Hz
PAL60 : PAL60Hz
SECAM : SECAM
NTSC3 : NTSC3.58
NTSC4 : NTSC4.43
H525I : 525i(Component/HDMI)
H625I : 625i(Component/HDMI)
H525P : 525p(Component/HDMI)
H625P : 625p(Component/HDMI)
H750P : 750p(Component/HDMI)
H125I : 1125i(Component/HDMI)
VGA : VGA(HDMI)
(2) ZOOM MODE
State of the screen mode is displayed.
NOTE:
In ADJUSTMENT MODE, the screen mode can be set only
to "FULL". When it is entered to ADJUSTMENT MODE, it is
automatically changed to "FULL", even if the setting is in
other screen mode.
(3) PICTURE MODE
State of the picture mode is displayed.
NOTE:
In ADJUSTMENT MODE, the picture mode can be set only
to "STANDARD". When it is entered to ADJUSTMENT
MODE, it is automatically changed to "STANDARD", even
if the setting is in other picture mode.
SETTING VALUE (DATA)
126 126
STD H STD H
PICTURE MODE COLOUR TEMP.
(4) WHITE BALANCE
State of the colour temperature is displayed.
NOTE:
In ADJUSTMENT MODE, the colour temperature can be set
only to "NORMAL". When it is entered to ADJUSTMENT
MODE, it is automatically changed to "NORMAL", even if
the setting is in other colour temperature.
(5) SETTING ITEM NAME
Setting item name are displayed. The setting item numbers to
be displayed are listed below.
Item No.
S001 - S043 Video system setting -1
D001 - D020 Video system setting -2 [Do not adjust]
D031 - D099
A001 - A003 Audio system setting -1 [Do not adjust]
SD10 - SD15 Audio system setting -2 [Do not adjust]
O001 - O004 Option data setting [Not used]
(6) SETTING ITEM NO.
Setting item numbers are displayed. For the setting item
names to be displayed, refer to "INITIAL SETTING VALUES
IN THE SERVICE MODE".
(7) SETTING VALUE (DATA)
The SETTING VALUE is displayed.
Setting item
(No.YA492)1-17