Dodge Challenger 2015 User Manual page 166

W H A T T O D O I N E M E R G E N C I E S
Continuous driving with the Transmission Temperature Warning Light illuminated will
eventually cause severe transmission damage or transmission failure.
If you continue operating the vehicle when the Transmission Temperature Warning
Light is illuminated you could cause the fluid to boil over, come in contact with hot
engine or exhaust components and cause a fire.
Oil Life Reset
Your vehicle is equipped with an engine oil change indicator system. The "Oil Change
Due" message will flash in the DID display for approximately 10 seconds after a single
chime has sounded, to indicate the next scheduled oil change interval. The engine oil
change indicator system is duty cycle based, which means the engine oil change interval
may fluctuate, dependent upon your personal driving style.
Vehicles Equipped With Passive Entry
• Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the
ignition to the ON/RUN position (Do not start the engine).
• Push and release the DOWN
menu to "Vehicle Info."
• Push and release the RIGHT
• Push and hold the RIGHT
screen.
• Push and hold the DOWN
• Push and release the Up arrow button to exit the DID screen.
Vehicles Not Equipped With Passive Entry
• Without pushing the brake pedal, cycle the ignition to the ON/RUN position (Do not
start the engine).
• Push and release the DOWN
menu to "Vehicle Info."
• Push and release the RIGHT
• Push and hold the RIGHT
screen.
• Push and hold the DOWN
• Push and release the Up arrow button to exit the DID screen.
NOTE:
If the indicator message illuminates when you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this procedure.
164
CAUTION!
WARNING!
arrow button to scroll downward through the main
arrow button to access the "Oil Life" screen.
arrow button for one second to access the "Oil Life Reset"
arrow button until the screen shows 100% oil life.
arrow button to scroll downward through the main
arrow button to access the "Oil Life" screen.
arrow button for one second to access the "Oil Life Reset"
arrow button until the screen shows 100% oil life.