Page 1
24v Impact Wrench model CT0768 Ref no. JD505524 INSTRUCTION MANUAL CAUTION: Before using this cordless Impact • Safety wrench or any of its Instructions accessories, read this • Assembly manual and follow all • Operation its Safety Rules and •...
POWER TOOL SAFETY GENERAL SAFETY RULES When operating a power tool outdoors, use an extension cord suitable for WARNING outdoor use. Use of a cord suitable for Read all instructions Failure to follow all outdoor use reduces the risk of electric shock instructions listed below may result in electric shock, fire and/or serious injury.
Page 5
POWER TOOL SAFETY POWER TOOL USE AND CARE SERVICE Do not force the power tool. Use the Tool service must be performed only by correct power tool for your application. qualified personnel. Service or The correct power tool will do the job better maintenance performed by unqualified and safer at the rate for which it was personnel could result in risk of injury.
POWER TOOL SAFETY Wash quickly with soap and water Neutralize with a mild acid such as SPECIFIC SAFETY RULES – cont’d lemon juice or vinegar If liquid gets into your eyes, flush TO AVOID INJURY from accidental immediately with clean water for a starting, always remove the battery from minimum of 10 minutes and seek the tool before installing or removing a...
SYMBOLS BATTERY & CHARGER SAFETY kilograms bars pascals Hours Do not operate charger if it has received a sharp blow, been dropped or otherwise minutes damaged in any way. Have a qualified seconds technician examine the charger and No load speed repair it if necessary.
KNOW YOUR IMPACT WRENCH Square anvil Forward Reverse switch Trigger switch Battery Battery tool use and care Ensure the switch is in the off position before inserting the battery pack. Inserting the battery pack into power tools that have the switch on invites accidents When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another.
CARTON CONTENTS CARTON CONTENTS – cont’d Model CT0768 WARNING DESCRIPTION Impact Wrench If any part is missing or damaged, do not Battery Charger with plug the charger into the power source molded plug to until the missing or damaged part is BS1363A replaced.
ASSEMBLY & OPERATION CHARGING THE BATTERY The charger in Fig (1) may very from kit to kit this picture is for reference only. Place the charging stand near a 230/240V/50Hz electrical outlet. INSTALLING BATTERY IN TOOL Take the BS1363A plug (Fig1)(1) put it Remove the discharged battery (1) from into the 230/240v/50Hz mains outlet.
Page 12
ASSEMBLY & OPERATION FORWARD/REVERSE SWITCH VARIABLE SPEED TRIGGER SWITCH The forward/reverse switch (1) is conveniently mounted above the trigger switch (2) (see This drill is equipped with a variable speed Fig.3). To make the Impact wrench rotate ON/OFF trigger switch. clockwise push the forward / reverse switch to the left.
MAINTENANCE GENERAL WARNING When servicing, use only identical replacement parts. Use of any other part may create a hazard or cause product WARNING damage. Have you read “POWER TOOL DO NOT use solvents when cleaning plastic SAFETY”, “Impact wrench SAFETY”, parts.
PARTS LIST – MODEL CT0768 Impact wrench WARNING When servicing, use only identical replacement parts. Use of any other parts may create a HAZARD or cause damage to your power tool. Any attempt to repair or replace electrical parts on this power tool may create a hazard unless repair is performed by a qualified technician.
Page 16
CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in china...