Installing Embedded Multimedia Card Assembly (Emmc); Dc-In Board; Removing Dc In Connector - Dell Latitude 3380 Owner's Manual

Installing Embedded Multimedia Card assembly (eMMC)

1 Align the eMMC assembly to the system board.
2 Tighten the M2.0L3 screws that secure the eMMC assembly to the chassis.
3 Connect the interposer cable to its connector on the system board.
4 Install the:
a battery
b base cover
c microSD card
5 Follow the procedure in

DC-In Board

Removing DC in connector

1 Follow the procedure in
2 Remove the:
a microSD card
b base cover
c battery
3 To remove the DC-in connector:
a Disconnect the DC-in cable from its connector on the system board [1].
b Remove the M2.5xL5 screw that secures the DC-in connector to the display hinge [2].
c Lift and remove the DC-in connector from the system [3].
24 Removing and installing components
After working inside your computer.
Before working inside your computer.