System Extensions; Siemens Ab; Basic Unit; Extension To A Maximum Of 128 Video Inputs - Siemens SIMATRIX NEO V2 Configuration Manual

8

System extensions

8.1

Basic unit

8.1.1

Extension to a maximum of 128 video inputs

Siemens AB

Security Products
The basic unit features 16 video inputs, which are integrated into the mainboard.
The first video input module must therefore be inserted into the second slot from
the bottom.
Allocate a number to each additional video input module using the DIP switch
1.
on the module to indicate the sequence of the modules from the bottom
upwards. The bottom module is number 1, the top module number 7.
Video input module DIP switch setting
n.a.
1
2
3
4
5
6
7
Tab. 8 Video input module address allocation on the basic unit
Each module must be inserted in the lowest available slot.
2.
Screw the module to the rear cover of the SIMATRIX NEO-
3.
Fig. 21 Video input module
If less than 5 connector slots are in use on the bus boards, insert a blanking plate into the uppermost
free slot and screw it in place. This will provide extra reinforcement if the unit ever needs to be moved
in the future.
Finally, use the bus boards to connect all the video input modules and, if
4.
applicable, the blanking plate, to the mainboard.
Video inputs
n.a. 1 – 16 on the mainboard
0001 17 – 32
0010 33 – 48
0011 49 – 64
0100 65 – 80
0101 81 – 96
0110 97 – 112
0111 113 – 128
System extensions
37