LG 40LX774H Setup Manual page 69

Reference: Downloading a Splash Screen Image using a USB Memory
This section describes how to download a splash screen image using the TV Manager "Logo
Image Download" option, though you may also use the Ez Download utility to download the splash
screen image, if desired. See "Ez Download Utility" on pages 26 to 29 for further information.
Splash Screen Image File Guidelines
• The splash screen image may be either a baseline or progressive JPEG or a 24-bit (RGB
8x8x8) BMP.
• A JPEG image should be no larger than 6 MB.
• A BMP image should be no larger than 5.93 MB.
• The maximum resolution allowed for the splash screen image is 1920 x 1080 pixels (FHD).
• Avoid using special characters, such as ?, &, @, etc., in the splash screen image filename.
Before You Begin
• The splash screen image file must be stored in a folder named "LG_DTV" in the root directory
of the USB memory device.
• Ensure the USB device has been formatted with FAT format.
Download the Splash Screen Image
1. Turn ON the TV, and then insert the USB memory device into either of the USB ports on the TV.
2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in
Pass-through Mode) or the Function Menu (TV is not in Pass-through Mode).
3. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the
screen, select the All Settings
menus.
4. Use the arrow navigation keys to select/highlight either the General menu icon from the TV
setup menus or the Safety menu icon from the Function Menu. Then, press the number "7"
key a total of seven times to access the TV Manager (see example on following page).
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
5. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the image file you wish to use. If necessary, use the arrow keys on
the Installer Remote to select/highlight the USB DEVICE button in the top right corner of the
screen and press OK. Then, use the Up/Down arrow keys to select the appropriate USB device
from the pop-up list of USB devices displayed at the top of the screen.
206-4309
menu icon and press OK to access the advanced TV setup
USB Device
USB 1: Device 1
USB 2: Device 2
Device
(Continued on next page)
69