LG 40LX774H Setup Manual page 64

IP Environment Setup (Cont.)
(Continued from previous page)
3. If you would like to enable SoftAP, complete the SoftAP access
configuration as follows:
• Select/highlight SoftAP and press OK on the Installer Remote.
• When you initially access the SoftAP screen (see example at
right), the OFF/ON toggle button at the top right of the screen is
selected/highlighted by default. Press OK on the Installer Remote
to turn SoftAP ON.
• To enable use of a randomly generated security key for SoftAP
access, set the Use Default field to "Enable" (the Security Key
field will subsequently be grayed out and the random security key
will be displayed).
• To specify your own security key for SoftAP access, set the Use
Default field to "Disable." Then, select the Security Key field and
press OK. In the data entry field, you can use the number keys on
the Installer Remote to direct enter a numeric security key, or you
can use the arrow keys to select the appropriate alphanumeric
characters—at least eight, but no more than 64—from the pop-up
virtual keyboard displayed at the bottom of the screen. Note that
the security key may not contain any special characters (:, /, \, @,
etc.). When you are done, select Enter from the virtual keyboard,
and then press OK on the Installer Remote.
• Select the appropriate values in the Wi-Fi Signal Strength and
Wi-Fi Channel fields, as required.
4. If desired, you can specify a name for this TV so that it is easy
to identify and differentiate from other TVs for which sharing has
been/will be enabled.
Note: By default, the TV name is the TV's serial number. However,
if a room number is specified in the EZ-Manager Wizard or in the
General Menu / Room Info screen, the TV name is changed to the
room number.
To edit the TV name, use the Up/Down arrow keys to select the
TV Name field, and then press OK. You can then use the number
keys on the Installer Remote to direct enter a numeric TV name, or
you can use the arrow keys to select the appropriate alphanumeric
character(s) from the pop-up virtual keyboard at the bottom of the
screen. When you are done, select Enter from the virtual keyboard,
and then press OK on the Installer Remote.
5. Once all fields are completed as required, use the arrow keys on the
Installer Remote to return to the IP Environment Menu, as necessary,
or press to exit the IP Environment Menu.
Note: While Smart Share, Screen Share, Media Renderer, and
Bluetooth Sound Sync settings are clonable, DIAL and SoftAP settings,
as well as the TV name cannot be cloned.
64
MEDIA SHARE
Network
Pro:Centric
Smart Share
^
Disable
Screen Share
Media Share ^
Disable
Media Renderer
^
Disable
Pre-loaded
Apps
Bluetooth Sound Sync
^
Disable
DIAL
^
Disable
TV Name
^
406KCEA6Q508
SoftAP
Notes:
•
Screen Share MUST be enabled in
addition to Smart Share in order for
guests to use Wi-Fi Direct.
•
If you enable Bluetooth Sound Sync,
a pop-up confirmation banner will be
displayed since enabling Bluetooth
Sound Sync renders Wireless LG
Sound Sync unavailable. Select
Yes to continue.
SOFTAP
Network
Media Share /
Pro:Centric
Use Default
^
Disable
Security Key
^
Media Share
00000000
Wi-Fi Signal Strength
^
Not Used
Pre-loaded
Apps
Wi-Fi Channel
^
Auto
ON
206-4309