Replacement Parts; Grounding - Hitachi C 7WDM Safety And Instruction Manual

REPLACEMENT PARTS

When servicing use only identical replacement parts.
Repairs should be conducted only by a Hitachi authorized service center.

GROUNDING

1. Grounding Instructions.
In the event of a malfunction or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock.
This power tool is equipped with 3-conductor type electric cord having an equipment-
grounding conductor and a plug with a grounding pin, as shown in Fig. 5. The plug must be
plugged into a matching receptacle that is properly installed and grounded in accordance
with all local codes and regulations.
WARNING:
Do not modify the provided plug if it does not fi t the receptacle.
Have a proper receptacle installed by a qualifi ed electrician.
If repair or replacement of the electric cord or plug is necessary, do not connect the
equipment-grounding conductor to a live terminal.
Repair or replace damaged or worn cord immediately. This power tool is intended for use on
a circuit with a receptacle similar to the one illustrated in Fig. 5.
WARNING:
Always connect the power tool to a grounded metal, permanent wiring
system: or to a system having an equipment-grounding conductor.
3-Pronged Plug
Grounding Prong
Properly Grounded
3-Pronged Receptacle
Fig. 5
English
11