Midland GXT-400 Owner's Manual page 11

Model GXT-400
®
VIBRATE-ALERT FUNCTION :
Your GXT-400 is equipped with a VIBRATE-ALERT function for silent
operation of the radio. The radio will vibrate when receiving a call tone
transmission instead of emitting a call tone sound.
To activate the VIBRATE-ALERT mode, press the MENU [14] button
five times, the display will show the VIBRATE-ALERT [8] icon blinking
while on the right of the CHANNEL NUMBER [4] display, an "oF" icon
appears. Select "on" by pressing the [13] buttons and push the
/
PTT[12] key, or wait for 5 seconds for confirmation. The VIBRATE-
ALERT [8] icon will remain on the display.
To de-activate the VIBRATE-ALERT mode, press the MENU [14]
button five times, the display will show the VIBRATE-ALERT [8] icon
blinking while on the right of the CHANNEL NUMBER [4] display, an
"on" icon appears. Select "oF" by pressing the [13] buttons and
/
push the PTT[12] key, or wait for 5 seconds for confirmation. The
VIBRATE-ALERT [8] icon will disappear on the display.
ROGER BEEP (end of transmission) TONE :
When the PTT [12] button is released, the radio will beep to confirm to
other users that your transmission has finished.
To activate the ROGER BEEP tone , press the MENU [14] button six
times, the display will show an "rb" icon while on the right of the "rb"
[4] display, an "oF" icon appears. Select "on" by pressing the
[13] buttons and push the PTT[12] key, or wait for 5 seconds for
/
confirmation.
To de-activate the ROGER BEEP tone , press the MENU [14] button
six times, the display will show an "rb" icon while on the right of the
"rb" [4] display, an "on" icon appears. Select "oF" by pressing the
[13] buttons and push the PTT[12] key, or wait for 5 seconds for
/
confirmation.
Page 11 www.midlandradio.com