Pioneer Elite VSX-37TX Operating Instructions Manual page 30

Initial Set Up
Î
S0URCE
OPERATION
DVD/LD TV/SAT
CD
CLASS
¶
-
TUNING
1
DTV ON/OFF DTV MENU
1
4
7
GUIDE
+10
+
TV VOL
–
REMOTE SETUP
INPUT
ATT
SYSTEM SETUP
4
EFFECT/
CH SEL
(to exit
DIGITAL
NR
SYSTEM
MULTI CH
MIDNIGHT
SETUP)
LIGHT
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
30
USE SETUP
RECEIVER
MULTI SYSTEM
OFF
VCR1 VCR2
MULTI CONTROL
MD/
TUNER TVCONT
TAPE1
MPX BAND DIRECT ACCESS
7 3 8
+ - +
STATION
¡ 4 ¢
-
+
CHANNEL
2 3
5 6
8 9
EXIT
0
ENTER
DISC
+
TV
TV CONTROL VOLUME
–
TV FUNC
MENU MUTE
+ FUNCTION
ENTER
– SIGNAL
SELECT
STEREO/
DSP
INPUT
DIRECT
/ DTS
THX ADVANCED STANDARD
Channel Delay (See p.34)
Set up all your speakers for the most realistic surround sound.
Adding a slight delay to some speakers enhances sound
separation and is particularly important for achieving a surround
sound effect. You need to figure out the distance from your
listening position to your speakers to add the proper delay.
Channel Level (See p.35-36)
Use to balance the volumes of your different speakers.
Crossover Network (See p.37)
This feature lets you select which bass frequencies will be sent
to the subwoofer or front speakers.
Bass Peak Level (See p.38)
Dolby Digital and DTS audio sources include ultra-low bass
tones. Set the bass peak level as needed to prevent the ultra-
low bass tones from distorting the sound from the speakers.
Dynamic Range Control (See p.39)
This feature makes possible excellent surround sound effects
when listening to Dolby Digital sources at low volumes.
Multi Channel In Setting (See p.40)
This feature lets you hook up a multi channel external decoder
that may give you higher quality when decoding discs.
Multi-Room (See p.78-82)
You can set up this unit to power systems in different rooms.
4 Go on to the next page to continue set up.
If you don't want to make any settings go can exit this setup.
To exit the SYSTEM SETUP MENU and on-screen display press
SYSTEM SETUP button again.
memo
After you complete one of the SYSTEM SETUP menus and return
to the basic SYSTEM SETUP screen the receiver automatically
moves the cursor to the next SYSTEM SETUP menu. For example,
if you've completed SPEAKER SETTINGS and returned to the basic
SYSTEM SETUP screen, CHANNEL DELAY will be selected
automatically. You can notice this on your TV screen.