Connections - Pioneer CDJ-800 Operating Instructions Manual

CONNECTIONS

÷ Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.
1. Connecting to a DJ mixer (DJM-300, DJM-500, DJM-600, DJM-3000)
(sound output and CONTROL terminal connection)
Use the supplied audio cables. Connect the white plug to the L (left) terminal and the red plug to the R (right) terminal.
Connect the supplied control cord to enable control of the unit from the mixer to allow fader start play and back cue.
Connecting DJM-600
÷ Connections for the DJM-300 and DJM-500 are similar; use the supplied audio cables to connect the mixer's CD1 jacks to Player A, and CD2 jacks to Player B. When
using the DJM-3000, Player A is connected to LINE 1 of CH-1, and Player B is connected to LINE 3 of CH-2.
2. Connecting control cord to allow relay play
Alternate playback can be automatically performed when the CONTROL terminals of two units are connected with the supplied control cord. P. 15
Supplied
control
cord
Supplied
audio
cable
Supplied control cord
Supplied control cord
BEFORE OPERATIONS
Supplied audio cable
<DRB1333>
7
En