5. Top cover (0-A301)
[Note of assembly]
When assembling the top cover, refer to the Parts list and figures below.
The type of the Hot shoe cover should be "FK" type for MZ-7. (The other type may activate
the switch (A329) and result the Flash won't pop-up.)
5-a. Arrangement of the reverse side of top cover
*Arrangement of Q100's lead wires
Black Brown Blue Green (Q100)
Bond
5-b. Flash frame (Q2)
Apply silicon
(4 points)
DT (7x10)
DT (5x7)
DT (4x10)
Q3 (Adj.)
Bond
T60
*Center part of top cover
Green
27550
0-T57
0-T20
0-A373
0-A368
Gray Orange G119
Blue
From top, Green, Brown,
Black and Blue
0-A365
5/9