General Specifications - Onkyo TX-8220 Instruction Manual

Hide thumbs Also See for TX-8220:
Table of Contents

Advertisement

Available languages

Available languages

> Before Start
> Part Names

General Specifications

Amplifier (Audio) section
Rated Output Power (FTC) (North American)
0 With 8 ohm loads, both channels driven, from 20 -
20,000 Hz; rated 45 watts per channel minimum RMS
power, with no more than 0.08% total harmonic
distortion from 250 milliwatts to rated output.
0 With 6 ohm loads, both channels driven, at 1 kHz;
rated 85 watts per channel minimum RMS power, with
no more than 0.9% total harmonic distortion from 250
milliwatts to rated output.
Rated Output Power (IEC) (European, Asian and
Australian)
2 ch k 100 W at 6 ohms, 1 kHz, 1ch Driven of 1%THD
MAXIMUM Effective Output Power (JEITA)
2 ch k 100 W at 6 ohms, 1 kHz, 2ch Driven of 10%THD
Dynamic Power (*)
(*)IEC60268-Short-term maximum output power
140 W (3 ≠)
120 W (4 ≠)
80 W (8 ≠)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance
450 mV/40 k≠ (LINE (Unbalance))
10 mV/50 k≠ (PHONO MM)
Rated RCA Output Level and Impedance
420 mV/2.2 k≠ (LINE OUT)
2.8 V/3.3 k≠ (SUBWOOFER PRE OUT)
Phono Overload
40 mV (MM 1 kHz, 0.5%)
Frequency Response
10 Hz - 100 kHz/i1 dB, j3 dB (DIRECT)
Tone Control Characteristics
n12 dB, 100 Hz (BASS)
n12 dB, 10 kHz (TREBLE)
Signal to Noise Ratio
100 dB (IHF-A, LINE IN, SP OUT)
93 dB (IHF-A, PHONO IN, SP OUT)
26
> Install
> Playback
Speaker Impedance
4 ≠ - 16 ≠
Headphone Output Impedance
390 ≠
Headphone Rated Output
60 mW (32 ≠, 1 kHz, 10% THD)
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (European)
AM Tuning Frequency Range (North American)
530 kHz - 1710 kHz
Preset Channel
40
Digital Tuner (European)
DAB / DAB+
BLUETOOTH Section
Communication system
BLUETOOTH Specification version 4.2
Frequency band
2.4 GHz band
Modulation method
FHSS (Frequency Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.3
AVRCP 1.5
Supported Codecs
SBC
AAC
Transmission range (A2DP)
20 Hz - 20 kHz (Sampling frequency 44.1 kHz)
Maximum communication range
Line of sight approx. 32 ft. / 10 m (*)
(*)The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, cordless phone,
reception sensitivity, antenna's performance, operating
system, software application, etc.
General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220-240 V, 50/60 Hz (European)
Power Consumption
150 W (North American)
160 W (European)
0.4 W (Stand-by)
20 W (No-sound)
Dimensions (W k H k D)
17-1/8" k 5-7/8" k 12-15/16"
435 mm k 149 mm k 328 mm
Weight
6.8 kg / 15 lbs (North American)
7 kg / 15.4 lbs (European)
Audio Inputs
Digital
OPTICAL 1 (TV), Maximum Fs: 96 kHz
COAXIAL 1 (CD), Maximum Fs: 96 kHz
Analog
PHONO, CD, BD/DVD, CBT/SAT, LINE
Audio Outputs
Analog
SUBWOOFER PRE OUT
LINE OUT L/R
Speaker Outputs
SPEAKERS A: L/R
SPEAKERS B: L/R
Phones
PHONES (Front, Ø1/4"/6.3 mm)
Setup |
Others

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents