Listening To The Radio; Playback; Playing A Usb Device; Device - Sony RSX-GS9 Operating Instructions Manual

Listening to the Radio

Listening to the Radio
To listen to the radio, press SOURCE (SRC) to select
[Tuner].
Use the remote commander to perform the
following.
Storing automatically (BTM)
1
Press MODE to change the band (FM1,
FM2, FM3, AM1 or AM2).
Alternatively, press  on the unit to change
the band.
2
Press and hold MENU, press  or  to
select [General], then press ENTER.
3
Press  or  to select [BTM], then press
ENTER.
The unit stores stations in order of frequency on
the number buttons.
Tuning
1
Press MODE to change the band (FM1,
FM2, FM3, AM1 or AM2).
Alternatively, press  on the unit to change
the band.
2
Perform tuning.
To tune manually
Press and hold  or  to locate the
approximate frequency, then press  or 
repeatedly to fine adjust to the desired
frequency.
To tune automatically
Press  or . (Alternatively, press and hold
 or  on the unit for more than 1 second.)
Scanning stops when the unit receives a station.
Storing manually
1
While receiving the station that you want
to store, press and hold a number button
(1 to 6) until [MEM] appears.
Receiving the stored stations
1
Select the band, then press a number
button (1 to 6).
Alternatively, press  or  on the unit.
12
GB

Playback

Playing a USB Device

In these Operating Instructions, "iPod" is used as a
general reference for the iPod functions on an iPod
and iPhone, unless otherwise specified by the text
or illustrations.
For details on the compatibility of your iPod, see
"About iPod" (page 20) or visit the support site on
the back cover.
MSC (Mass Storage Class)-type USB devices (such as
a USB flash drive, digital media player, Android
smartphone) compliant with the USB standard can
be used.
Depending on the digital media player or Android
smartphone, setting the USB connection mode to
MSC is required. (A USB device in MTP mode is not
available.)
"Music" folder and its location (when
connecting the USB device)
Be sure to store audio files in a folder named
"Music", and organize the folder directly under the
root directory of the USB device. Otherwise the unit
will not recognize audio files on the device.
Notes
 For details on the compatibility of your USB device,
visit the support site on the back cover.
 During USB playback, fast-forward/fast-reverse
operation is not supported.
 The unit starts reading the file structure of the
connected device when playback is performed.
 [*] appears on the display while the unit is reading the
file structure of the connected device. While [*] is
displayed, a track or album (folder) cannot be
skipped.
 During USB playback via the USB type-A port, a DSD
file on the connected device is converted into PCM
format.
 Playback of the following files is not supported.
WMA/AAC:
 copyright-protected files
 DRM (Digital Rights Management) files
WMA:
 lossless compression files
 multi-channel audio files
 As a guide, recognizing a total of 2,000 audio files in
200 folders on the USB device takes about 150
seconds.
 The unit may take some time to recognize the USB
device if its file organization has been updated.
 Before connecting the USB device, be sure to select
USB1 or USB2. If a USB device with updated file
structure is connected while the unit and the display
are off, or without selecting USB1 or USB2, the unit will
not recognize the latest file organization of the

device.