Pioneer Elite VSX-52TX Operating Instructions Manual page 24

Controls and displays
04
10 Front panel controls
To access the front panel controls, push gently on the
lower third portion of the panel with your finger.
11 TUNER CONTROL
TUNER EDIT
Use with the MULTI JOG dial to memorize and name
stations for recall (page 48).
TUNING/STATION
Use with the MULTI JOG dial to select station presets
and radio frequencies. (page 47).
BAND
Switches between AM and FM radio bands (page 47).
MPX
Press to receive a radio broadcast in mono (page 47).
12 MIDNIGHT/LOUDNESS
Use Midnight when listening to movie soundtracks at low
volume. Use Loudness to boost the bass and treble at low
volume (page 36).
13 TONE
When the STEREO mode is selected, press this button to
access the bass and treble controls, which you can then
adjust with the MULTI JOG dial.
14 ACOUSTIC EQ
Press to select an Acoustic Calibration EQ setting
(page 33).
15 DIALOG ENHANCEMENT
Use to make dialog stand out when watching TV or a
movie (page 36).
16 MULTI CH IN
Press to select the component connected to the MULTI
CH IN terminals (for example, a DVD-Audio player). See
Selecting the multichannel analog inputs on page 37.
17 SIGNAL SELECT
Use to select an input signal (page 33).
18 EXTENDED MODE
Selects the surround back channel mode (page 34) or
virtual surround back mode (page 35).
19 SPEAKERS
Use to change the speaker system (page 56).
24
En
20 VIDEO2 INPUT
See Connecting to the front panel video terminal on
page 18.
21 MCACC SETUP MIC jack
Use to connect the supplied microphone.
22 MULTI ROOM controls
If you've made multi-room connections (see Multi-room
listening on page 58) use these controls to control the
sub room from the main room (see Using the sub room
controls on page 58).
23 System Setup menu controls
SYSTEM SETUP
Use with the MULTI JOG dial to access the System
Setup menu (page 11, page 38, page 63).
RETURN
Press to confirm and exit the current menu screen.
24 PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.