Using This Receiver With A Pioneer Flat Panel Tv - Pioneer VSX-1018AH-K 7 Operating Instructions Manual

Other connections
Using this receiver with a Pioneer flat
panel TV
If you have a Pioneer flat panel TV, you can use an SR+
1
cable to connect it to this receiver and take advantage of
various convenient features, such as automatic video
input switching of the flat panel TV when the input is
2
changed.
Pioneer flat panel TV
CONTROL
OUT
VSX-1018AH
HDMI
COAXIAL
ASSIGNABLE 1 - 2
OUT
IN 1
(DVD)
IN 2
(CD)
BD IN
XM IN
CON-
CON- IN IN
TROL TROL
OPTICAL
IN 1
OUT
IN 1
(TV SAT)
IN 2
IR
(DVR1)
ZONE2
IN
ASSIGNABLE
IN 2
1 - 2
ASSIGN-
OUT
ABLE
1 - 2 OUT
DIGITAL
Important
• You can't use the SR+ features when HDMI Control
is set to ON. Make sure to set HDMI Control to OFF
when you use the SR+ features (page 65).
• If you connect to a Pioneer flat panel TV using an
SR+ cable, you will need to point the remote control
at the flat panel TV remote sensor to control the
receiver. In this case, you won't be able to control the
receiver using the remote control if you switch the flat
panel TV off.
• Before you can use the extra SR+ features, you need
to make a few settings in the receiver. See The Input
Setup menu on page 67 and SR+ Setup for Pioneer flat
panel TVs on page 70 for detailed instructions.
Note
1 The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Customer Support division for
more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed mini phone plug for the connection).
2 This receiver is compatible with all SR+ equipped Pioneer flat panel TVs from 2003 onward.
VIDEO M
IN IN OUT IN OUT IN
DVD TV SAT DVR1 DVR2
AUDIO
IN IN OUT IN OUT IN
L
R
SPEAKERS
R
A
MULTI CH IN
FRONT CENTER SURROUND SURROUND BACK
L
R
SUBWOOFER
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN jack of this receiver with the CONTROL
OUT jack of your flat panel TV.
VIDEO
Pioneer flat panel TV
INPUT 1
DVD player
DVD
AUDIO IN
STANDBY/ON
PHASE ADVANCED
CONTROL MCACC
DVD BD TV SAT DVR 1/DVR 2 VIDEO
INPUT
SELECTOR
AUTO SURR/ SOUND STANDARD ADVANCED STEREO/
STREAM DIRECT RETRIEVER SURROUND SURROUND A.L.C.
PHONES
MULTI-ZONE
CONTROL ON/OFF SPEAKERS ST – ST +
VSX-1018AH
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
flat panel TV, and just connect the audio (analog and/or
digital) to this receiver.
VIDEO
INPUT 2
Satellite receiver, etc.
TV SAT
AUDIO IN
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-1018AH
DIGITAL PRECISION DIGITAL VIDEO
PROCESSING SCALER HDMI
HDMI 1/HDMI 2 CD/CD-R FM/AM XM/SIRIUS iPod USB MULTI CH IN
MASTER
VOLUME
VIDEO INPUT iPod DIRECT MCACC
VIDEO L AUDIO R DIGITAL IN USB SETUP MIC
08
63
En