Casio CGP-700 User Manual page 56

Getting Ready
Assembling the Stand
Before assembling the stand, first take a few moments
to check that all of the items shown below are present.
• This stand does not include any of the tools required
for assembly. It is up to you to prepare a large
Philips head (+) screwdriver for assembly.
A B
Part Qty
4
E
2
F
6
G
2
H
2
I
2
J
• Before starting assembly of the stand, divide the
polystyrene foam packing material into four parts.
• Do not use any screws other than those that come
with the stand. Doing so risks damage to the stand
and/or Digital Piano.
• You can find the screws in a plastic bag inside of the
packing material.
• If anything is missing or damaged, contact your local
CASIO service provider.
* CAUTION
C
D
1.
• Assembly of the stand should be performed by at
least two people working together. The Digital Piano
unit is particularly heavy. When moving it, get at
least one other person to help you and handle with
care.
• This stand should be assembled on a flat surface.
• Take care that you do not pinch your fingers
between parts when assembling them.
• Be sure to insert felt or other material between the
rubber feet and flooring. Do not allow direct contact
between them. Some types of flooring material may
become discolored or damaged by direct contact
with the rubber feet.
Turn over and place the piano onto a blanket,
pillow, or other soft object, insert the support
piece D into the groove along the bottom
and secure it in place with two
F
F screws.
F
D
D
EN-55
,