Casio CGP-700 User Manual page 47

Configuring Digital Piano Settings
Item
Operation Lock
Auto Resume
Auto Power Off
Factory Reset
■ CONTROLLER Screen
Use this to configure pedal and pitch bend wheel settings.
Item
Upper1 Pedal
Upper2 Pedal
Lower1 Pedal
Lower2 Pedal
Bend Range
EN-46
When this setting is turned on, the Digital Piano's buttons (except
for the 1 P button and buttons required for unlock) are locked, so
no operation can be performed. Turn on operation lock when you
want to protect against unintentional button and control panel
operations.
When "On" is selected for this setting, the Digital Piano will
remember its settings whenever it is turned off, and restore them
when it is turned on again.
When "Off" is selected, settings are reset to their initial defaults
whenever the Digital Piano is turned on.
Specifies if Auto Power Off (page EN-7) is enabled (On) or disabled
(Off).
Use this screen to return the piano's stored data and settings to their
initial factory defaults.
Turn on to apply the pedal effect to the main tone when the pedal is
depressed.
Turn on to apply the pedal effect to the layered tone when the pedal is
depressed.
Turn on to apply the pedal effect to the split (main) tone when the pedal is
depressed.
Turn on to apply the pedal effect to the split (layered) tone when the pedal is
depressed.
Specifies (in semitone units) how much the pitch of the keyboard
performance parts (Port A parts 1 through 5) changes when the pitch bend
wheel is rotated all the way upwards or downwards.
Description
Description
Setting
Off, On
Off, On
Off, On
–
Setting
Off, On
Off, On
Off, On
Off, On
00 to 24