Navigation; Calibration; Removing And Attaching The Flip Keypad - Sony Ericsson P800 User Manual

P800_UM.book Page 36 Thursday, July 11, 2002 10:58 AM
Preliminary

Navigation

In flip open mode navigation done using the stylus and tapping
selected items and by using the Jog Dial, see the chapter
"Getting Started" on page 9"

Calibration

The screen is pre-calibrated to factory settings. However, this
may not necessarily agree with how you use the stylus.
Calibration is calculated by the average stylus tap speed and the
location of the stylus tap on selection.
To re-calibrate the screen:
1. Select
Applications > Control panel > General > Display
2. Tap and the calibrate screen appears.
Calibrate
3. Tap once at the centre of each of the three calibration points
in numerical order.
4. Tap or to accept or reject the new settings.
Yes No
To restore the factory settings
1. Select
Applications > Control panel > General > Display
2. Tap and the calibrate screen appears.
Calibrate
3. Press Jog Dial - the text "Factory settings restored" is shown
and you are taken back to the display screen.
36

Removing and attaching the flip keypad

Removal
1. Use your fingernail to gently lift up and push the cover plate
under and away from the keypad, see picture below.
Note Be careful with the touch sensible screen. Never use a
sharp object like a screw driver.
2
1