Table of Contents
Advertisement
Remove Shipping Material
Before you install your washer, remove all shipping material.
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1. To protect the floor, place two corner posts from the shipping
material on the floor in back of the washer.
2. Firmly grasp the body of the washer and gently lay it on the
corner posts.
3. Remove plastic foam packaging from under washer. Use an
adjustable wrench to turn the washer legs out approximately
³⁄₄" (1.9 cm). This is the recommended setting. Later
adjustment may be needed.
4. Stand the washer up.
5. Remove tape from washer lid. Open washer lid and remove
foam shipping piece, parts bag and hoses from washer
basket. Remove tags from dispenser drawer. Close the lid.
5
Advertisement
Table of Contents
