Technics SC-C70 Operating Instructions Manual page 33

5 Select "Next" to apply the settings.
• "Linking" is displayed.
• When the connection is established, "Success"
is displayed.
 "Fail" may be displayed if the connection was
not complete. Try this method again from
[SETUP] menu. If "Fail" is still displayed, try
other methods (⇒ 29).
• Depending on the device, the connection
complete screen may not be displayed.
6 Make sure to connect your Android
device back to your home wireless
network.
7 Press [OK] on the remote control to exit
the setting.
• "
" is displayed.
Using an internet browser
"Setup from Browser"
You can access this unit's network settings from the
internet browser on iOS device (iOS version 6.1.6 or
earlier), Android device, PC, etc.
• This unit uses the 2.4 GHz frequency band only.
Check the device can be connected using 2.4 GHz
band.
• The following explanations are based on an
Android device.
1 Press [ ], [ ] on the remote control to
select "Setup from Browser" and then
press [OK].
• "Setting" is displayed.
2 Go to Wi-Fi settings on your compatible
device and select "00 Setup
connect to this unit.
******
• "
to each set.
3 Start the internet browser and type
"http://192.168.1.12/" into the URL
address field and display the page.
• Examples of internet browsers
 Android device: Google Chrome™
 iOS device/Mac: Safari
 PC: Windows Internet Explorer
• If the network setup screen is not
displayed on the Android device even if
"http://192.168.1.12/" is input, set the Android
device to the airplane mode. Then, set the
Wi-Fi setting to On, and make the network
connection setting again on the setting menu
of this unit.
4 Select "Search wireless network".
" stands for a character that is unique
33
" to
******
(Continued)