Bose QUIETCOMFORT 3 Owner's Manual page 17

English Dansk
My cell phone • Make sure all batteries are charged, the headphones, kit control module, and cell
does not ring in
the headphones.
• Make sure your cell phone is set to the Bluetooth
• Make sure your Bluetooth
• Move the cell phone to within 33 ft (10 m) of the communications kit module.
People cannot • Make sure the removable boom microphone is firmly attached and the unit is snapped
hear me on the
phone.
• Make sure the microphone is within a finger's width of your mouth.
There is popping • Move the cell phone closer to the communications kit control module for a better signal
or static when I
use my phone.
My cell phone • The Bluetooth
music doesn't
• Attach the audio connection cable to the audio output on your phone and to the audio
play in the
headphones.
Deutsch Español
phone are turned on and the cell phone is set to ring (not vibrate).
If not, repeat the steps outlined under "Bluetooth Pairing" on page 7.
securely into the jack on the left earcup.
between the two.
® link to your phone does not support A2DP music protocol.
connection jack on the communications kit module. This allows you to hear the music
play and to receive and make calls as described on page 12.
Français
®
pairing was completed successfully.
Italiano Nederlands
® mode.
Svenska
M
AINTAINING
17