Configuring Watch Settings; Returning The Watch To Its Factory Default; Settings; Changing The Home City Summer Time Setting - Casio 5512 Operation Manual

Configuring Watch Settings

You can use CASIO WATCH+ to specify the
amount of time until a Bluetooth connection is
automatically terminated, to enable or disable
the watch operation tone, and to configure
other settings.
1.
Y Tap the "CASIO WATCH+" icon.
2.
X Hold down the (C) button for about 2
seconds.
This causes the second hand to move
●
to 12 o'clock. Keep (C) depressed at
this time until the second hand
completes one full rotation.
The retrograde dial hand will move from
●
"R" to e when a connection is
established between the watch and
phone.
3.
Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
Operation Guide 5512
Returning the Watch to Its
Factory Default Settings
Using CASIO WATCH+ to reset the watch
returns to the settings below.
Stopwatch
●
TARGET (Target) value: Off
ー
Target value type: FASTEST (Fastest)
ー
Lap time data: All deleted
ー
Alarm
●
Alarm time: 0:00
ー
Alarm setting: Off
ー
Mute setting: Off
●
Connection time: 3 minutes
●
Auto adjust: Off
●
1.
X Pull out the crown to the second click.
2.
X Hold down (C) for about 5 seconds.
This will cause the second hand to move
to 12 o'clock and then to "A" or "P" and
reset settings.
Hours
Mode hand
3.
Push the crown back in.
Minutes
Changing the Home City
Summer Time Setting
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down the (C) button for about 2
seconds.
This causes the second hand to move
●
to 12 o'clock. Keep (C) depressed at
this time until the second hand
completes one full rotation.
The retrograde dial hand will move from
●
"R" to e when a connection is
established between the watch and
phone.
3.
Y Perform the operation shown on the
phone screen to change the summer time
setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with CASIO WATCH+.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down the (C) button for about 2
seconds.
This causes the second hand to move
●
to 12 o'clock. Keep (C) depressed at
this time until the second hand
completes one full rotation.
The retrograde dial hand will move from
●
"R" to e when a connection is
established between the watch and
phone.
3.
Y Use CASIO WATCH+ to check the
charge level.
9