Clearing One Of The Remote Control Settings (Vsx-D509S); Clearing All The Remote Control Settings - Pioneer VSX-D409 Operating Instructions Manual

Clearing One of the Remote Control Settings (VSX-D509S)

DVD TV VCR CD-R
MULTI CONTROL
RCV CD TUN TVC
1 2 3
MIDNIGHT 5.1CH ATT
4 5 6
3
SIGNAL SELECT EFFECT
7 8 9
+10 DISC
0
ENTER
7 TV CONTROL
4 ¢
TV
2
DSP TEST TONE
CH SELECT CH LEVEL FL DIMMER
LOUDNESS FUNCTION MUTING SETUP
Î

Clearing All the Remote Control Settings

DVD TV VCR CD-R
MULTI CONTROL
RCV CD TUN TVC
3
1 2 3
MIDNIGHT 5.1CH ATT
4 5 6
SIGNAL SELECT EFFECT
7 8 9
+10 DISC
0
ENTER
7 TV CONTROL
4 ¢
TV
2
DSP TEST TONE
CH SELECT CH LEVEL FL DIMMER
LOUDNESS FUNCTION MUTING SETUP
Î
5 6 7 8
CHANNEL
EFFECT
LEVEL
‡
9 0 ENTER
10 DISC
CH
FUNC
TV CONTROL
VOL VOL
FQ
ST ST
ENTER
TOP
MENU
MENU
FQ
SOURCE CLASS MPX BAND
7 8 3
D.ACCESS CHANNEL
1 ¡ 4 ¢
LOUDNESS FUNCTION MUTING
FL REMOTE
MASTER
RECEIVER
DIMMER SETUP VOLUME
AUDIO/VIDEO PRE-PROGRAMMED
REMOTECONTROLUNIT
This method clears one of the buttons you have programmed and restores
the factory installed preset to that button.
2
1 Press SETUP and hold for three seconds.
3
The LED will blink twice.
3
2 Press the MULTI CONTROL button relating to
the button to be cleared.
3 Press 9, 7, then 6.
1
4 Press the button to be cleared.
5 Press the button to be cleared once more.
The LED blinks twice to indicate the button has been cleared.
VSX-D509S
2
Clears all presets, all learnt functions and restores the factory presets.
1 Press SETUP and hold for three seconds.
3
The LED will blink twice.
3
2 Press any MULTI CONTROL button.
3 Press 9, 8, then 1.
1
The LED blinks in sets of twos twice (thus four times) to indicate the
button has been cleared.
VSX-D409
0 Clears all presets and restores factory default settings.
Press and hold REMOTE SETUP and 0 at the same
time for more 3 seconds.
The LED display at the top of the remote control will blink. After blinking
three times, all the settings will be canceled.
REMOTE
SET UP
Preparations
27