Table of Contents
Advertisement
OPERATION
1) When insert USB drive into the USB
interface, the unit will read the USB
automatically.
2) If the USB have been inserted into the
unit. Press MODE button to select the
USB mode. Then the USB will be
played.
Note:
When reading the USB device, please
don't touch or take out the USB.
If following the instruction above, the unit
can't read the USB, please check if the
USB is in
good condition, or tack out the USB then
insert it into the USB interface once more.
• The main unit can only support the
standard USB-memory disc which is
approved by Microsoft.
• USB MP3 player is not a standard which
means different brand name or different
models have their own standard. So our
product cannot support every MP3
player.
• When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3 player
then connect it to
SETUP
The USB interface. Otherwise, it may
cause battery burst.
• When in USB play mode, be sure not to
remove the USB driver from the USB
interface.
In DVD mode, when the disc is playing or
in the stop mode, press SETUP on the
remote control to enter setup menu.
• When the cursor is on the topside, use
.
: buttons to move between
the different pages.
• Press
button to move the cursor to
the setup page below and then you can
use
buttons to move between
the different setup options.
• Press
button to display the choice list
for each setup option and then use
buttons and ENTER button to
change your selection.
SYSTEM SETUP
When you open the setup menu, you will
see the system setup page at first, see
below:
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1) TV SYSTEM: Change the TV mode
among NTSC, PAL and AUTO.
2) SCREEN SAVER: Change the SCREEN
SAVER on or off.
3) TV TYPE: Change the TV TYPE among
4:3PS, 4:3LB and 16:9.
4) PASSWORD: Change the PASSWORD
lock or unlock, the default PASSWORD
is "0000"
5) RATING: Change the parental RATING
among 1KID SAFE, 2G, 3 P G , 4PG13,
5PG-R, 6R, 7NC-17, 8ADULT.
6) DEFAULT: Restore the system setup to
the default setup.
LANGUAGE SETUP
• When you open the setup menu, you will
see the language setup page
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
You can change the OSD/ AUDIO/
SUBTITLE/ MENU language between
ENGLISH/GERMAN/SPENISH/FREN CH/
14
Advertisement
Table of Contents
