Table of Contents
Advertisement
❑ You may need to install the printer driver software before you use your printer. See the manual that came with your printer
for more information.
❑ If your printer is not functioning after your computer resumes from a power saving mode (Sleep or Hibernate), then restart
the computer.
❑ If the bidirectional communication functions are provided with your printer, disabling the functions on your computer may
enable printing. Follow these steps:
1
Click Start and Control Panel.
2
Click Printer under Hardware and Sound.
3
Right-click the printer icon and select Properties.
4
Click the Ports tab.
5
Click to cancel the Enable bidirectional support check box.
6
Click OK.
This disables the bidirectional communication functions of the printer, such as data transfer, status monitoring, and
remote panel.
IRX-4590_BGN
❑ If you have disabled the USB ports in the BIOS setup screen, you cannot use the printer connected to one of the USB
ports on your computer. To enable the ports, follow the steps and the tip in Disabling Built-in Devices
❑ If the use of USB ports is restricted by the USB Access Restriction Setting utility, you cannot use the printer connected
to one of the USB ports on your computer. To change the setting, see Restricting USB Access
IRX-4590_END
n
172
N
Troubleshooting
(page
115).
(page
116).
Advertisement
Table of Contents
