Recording Mode; Connecting Using The S-Video Output (Not Applicable To The European Model); Connecting Using The Component Video Output (Not Applicable To The European Model) - Pioneer S-DV313 Operating Instructions Manual

12 Other connections

Recording mode

The Recording mode allows you to make
analog recordings from the LINE 1 (OUT)
jacks.
When Recording mode is on, most sound-
related functions (including SURROUND,
ADVANCED, AUTO, SYSTEM SETUP)
become inactive. The display will briefly blink
RecMode On if you try and use a prohibited
function while Recording mode is on.
When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.
1 Press SOUND.
2 Use the
buttons to select 'Rec Mode?'.
3 Press ENTER.
4 Use the
buttons to select 'R.Mode On' or 'R.Mode
Off'.
Connecting using the S-video
output
Not applicable to the European model
If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.
70
En
(cursor left/right)
(cursor up/down)
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
TV
OPTICAL IN
AUDIO
LINE 2
S-VIDEO VIDEO
OUT OUT
VIDEO
XV–DV313
• The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See S-Video Out on page 62 for
more on this.
Connecting using the
component video output
Not applicable to the European model
If your TV has component video inputs, you
can use these instead of the standard video
output to connect this system to your TV. This
should give you the best quality picture from
the three types of video output available.
S-VIDEO
INPUT
FM AM
ANTENNA
LOOP ANTENNA
UNBAL 75Ω
Y P P
B R
COMPONENT VIDEO OUT