LG M2080D Owner's Manual page 33

EXTERNAL EQUIPMENT SETUP
HDMI/DVI - DTV Mode
Resolution
720 x 480
720 x 576
1280 x 720
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
NOTE
Avoid keeping a fixed image on the screen for
prolonged periods of time. Fixed images may
become permanently imprinted on the screen.
Use a screen saver when possible.
There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate or adjust the brightness
and contrast on the menu until the picture is clear.
If the refresh rate of the PC graphic card cannot
be changed, change the PC graphic card or con-
sult the manufacturer of the PC graphic card.
The synchronization input waveform for horizontal
and vertical frequencies are separate.
We recommend using 1920x1080 @ 60 Hz
(except for the M2080D), 1600x900 @ 60 Hz
(only M2080D) for the PC mode, this should pro-
vide the best picture quality.
Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the set or
the signal cable from the HDMI output port of the
PC to the HDMI/DVI IN port on the set.

Horizontal Vertical
Frequency(kHz) Frequency(Hz)
31.469 59.94
31.5 60
31.25 50
37.500 50
44.96 59.94
45 60
33.72 59.94
33.75 60
28.125 50.00
27 24
33.75 30.00
56.250 50
67.43 59.94
67.5 60
Component Mode
Horizontal
Resolution
Frequency(kHz)
720 x 480 15.73
720 x 480 15.75
720 x 576 15.625
720 x 480 31.47
720 x 480 31.50
720 x 576 31.25
1280 x 720 44.96
1280 x 720 45.00
1280 x 720 37.50
1920 x 1080 33.72
1920 x 1080 33.75
1920 x 1080 28.125
1920 x 1080 56.25
1920 x 1080 67.432
1920 x 1080 67.5
Connect the audio cable from the PC to the audio
input on the set. (Audio cables are not included
with the set.)
If using a sound card, adjust PC sound as required.
If the graphic card on the PC does not output
analog and digital RGB simultaneously, connect
either the RGB or HDMI/DVI IN to display the PC
output on the set.
If the graphic card on the PC does output analog
and digital RGB simultaneously, set the set to
either RGB or HDMI. (The other mode is set to
plug-and-play automatically by the set.)
DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
If you use an RGB-PC cable that is too long, there
may be interference on the screen. We recom-
mend using under 5m of cable. This provides the
best picture quality.
Vertical
Frequency(Hz)
59.94
60.00
50.00
59.94
60.00
50.00
59.94
60.00
50.00
59.94
60.00
50.00
50
59.94
60.00