Live Xm - Pioneer XM2GO User Manual

Using Your inno Alone

Live XM

✍
NOTE: You must receive a live XM signal for at least 8 hours a month (which may be split
over several listening sessions). This authenticates your XM subscription and ensures that you
can continue to enjoy your recorded XM content and live XM programming. If you do not dock
your inno as described, you will lose access to your recorded content and live XM programming.
Turn on your inno. Subscribe to XM (page 18) if you haven't done so already.
If you see "XM" at the top of the display, you're listening to XM content that is currently
being broadcast from the satellites.
If you see "My Music" on the display, you're listening to recorded XM or MP3/WMA tracks.
Press the Mode button to switch to "Live XM."
26
Using Your inno Alone
Using Your inno Alone
Selecting Channels
Press the up or down arrow buttons to scroll through the list of channels.
- OR –
Press the number keys on the remote that correspond to the channel number.
- OR –
1. Press the left arrow button on your inno. You will see a virtual keypad on the display.
2. Use the arrow buttons to select the
digits corresponding to the channel
number. Press the XM button after
highlighting each digit.
3. When you've entered a valid channel
number, your inno will tune to that
channel within 2 seconds.
27
Using Your inno Alone