Pioneer XM2GO User Manual page 12

Using Your inno Alone
Setup
In a Vehicle
(requires Car Accessory Kit CD-INCAR1, sold separately)
Every vehicle is different; for your safety, follow all instructions carefully.
Consult a professional installer if you have questions.
You can listen to your inno through your car stereo by using inno's built-in FM transmitter.
Simply find an unused FM frequency on the stereo and set inno to transmit on that same
frequency.
1. Mount antenna to the roof or trunk of the vehicle. During installation, make sure you are
outdoors and the antenna is not obstructed by tall buildings.
22
Using Your inno Alone
Using Your inno Alone
2. Insert inno into car dock.
3. Connect car dock to antenna cable and power adapter.
23
Using Your inno Alone