IRiver iFP-800 Series Hardware Instruction Manual page 20

Recording-external audio source
Recording from an external audio source
4
4
Press the
or (VOL + or VOL -)
I I
switch to select the LINE-IN mode.
FM LINE
MP3 VOICE
RADIO
6
6
Press the MODE/REC button and
LINE-IN recording is started.
AUDIO001
4-15
5
5
Press the NAVI/MENU button (or
PLAY/STOP) to go to LINE-IN
recording mode. (Record Standby
Mode)
or
IN
STEREO 44.1KHz 128KBPS
7
7
Press play on your external
equipment (if necessary) to begin
playback to be recorded.
NOTE
- The recorded file is saved as
AUDIO000.REC, AUDIO001.REC... in
sequential order. Files are saved in the
RECORD folder.
- Select Ext. Mic on the CONTROL line-
in/ext. mic menu to use the external
microphone. (Refer to page 4-23)
- Files recorded using an external
microphone are saved as EXMIC000.REC.
To stop recording
1
1
Press the MODE/REC button.
STEREO 44.1KHz 128KBPS
1
1
After pressing the NAVI/MENU button,
select a recorded file using the
VOL +
or switch.
VOL -
Recording-external audio source
To play a recorded file [ 1]
1
1
Press the PLAY/STOP button.
To play a recorded file [ 2]
2
2
Press the PLAY/STOP button.
4-16