IRiver iFP-800 Series Hardware Instruction Manual page 19

Recording-Voice
To stop recording
Press the MODE/REC button.
MONO 32KHz 32KBPS
NOTE
After stopping a recording, starting
again will create a new voice file.
NOTE
The recorded file is saved as VOICE000.REC in the VOICE folder.
If "00:00:00" is displayed on the LCD, the player's memory is full. To record, delete files and/or
folders on the player to make some space available.
(To delete : Refer to page 4-6, iRiver Music Manager
The player can not record when the memory is full or the battery is low.
Keep the player far away enough from the source to avoid distortion in the recording.
Recorded REC files can be converted to MP3 files using iRiver Manager.
(Refer to page iRiver Music Manager Software Instruction Manual 4-32~4-34)
4-13
To play a recorded file
Press the PLAY/STOP button.
To pause voice recording
Press button during recording.
Press button again to restart recording.
NOTE
Pausing the recording will not create a new file,
recording will be added to the current recording.
)
Recording from an external audio source
1
1
Connect the LINE OUT jack of the external equipment to the LINE IN jack of the player.
2
2
Set "LINE IN RECORDING MODE" in
the MENU.(Refer to page 5-22 for
details)
LINEIN RECORDING MODE
MONO STEREO
44.1KHz
128KBPS
NOTE
- Select Line-In mode on the menu to use the external microphone.
Recording-External audio source
3
3
Press and hold the MODE/REC button.
LINE
FM
MP3 VOICE
RADIO IN
4-14