Pioneer SC-LX502 Basic Manual page 14

> Before Start > Part Names
Speaker combinations
0 In any of the combinations, up to two powered subwoofers can be connected.
Speaker Channels
2.1 ch
3.1 ch
4.1 ch
5.1 ch
6.1 ch
7.1 ch
2.1.2 ch
3.1.2 ch
4.1.2 ch
5.1.2 ch
6.1.2 ch
7.1.2 ch
(*1) You can select one of Speaker B, Bi-AMP, or ZONE SPEAKER.
(*2) When using Speakers B, no sound is played from the surround back speakers when
playing from A+B.
(*3) No sound is played from the height speakers when playing audio from ZONE
SPEAKER.
(*4) You can connect both surround back speakers and height speakers. However, you can
only output audio from one of these at a time. When both are connected, you can set
which speakers to prioritize.
0 Press on the remote control (P6) and use "Other" - "Speakers" to switch speakers A
and B and to switch between surround back speakers and height speakers.
14
> Install
FRONT CENTER SURROUND
> Initial Setup > Playback
SURROUND
BACK HEIGHT
(*2)
(*2)
(*4)
(*4)
SP B
Bi-AMP
(Speaker B)
(*1)
(*1)
(*1)
(*1)
(*3)
(*3)
(*3)
(*3)
(*4)
(*4)
ZONE 2
(ZONE SPEAKER)
(P23)
(*1) (*1)
(*1) (*1)
(*1) (*1)
(*1) (*1)